Powder 300g 1040mm Width White Fiberglass Chopped Strand Mat
|Width||1040mm, 1270mm, etc|
|Weight||300g, 450g, 600g, etc|
|Roll||36kg, 40kg, 45kg per roll, etc|
Conventional Packing: Each roll in plastic bag, then 1 roll per carton + pallets.
‘Powder Bound’ fibreglass matting (CSM) is designed for use as chopped strand mat for epoxy resin, using a powder based binder that does not need to be broken down in the same way as emulsion bound mat, making it essential for use when laminating with epoxy resin, either making a mould or a part.
300gsm chopped strand mat glass reinforcement using a powder binder. Because the powder binder breaks down physically, rather than by a solvent in the resin, powder-bound CSM can be used with solvent-free resins, such as epoxy.
Normal width is 1040mm/1270mm,but also can produce it according to your requirements.
|Item||Standard Weight(g/m2)||Width(mm)||Loss On Ignition(%)||Moisture(%)||Compatible Resins|
|EMC225||225||1040/1270/2080 ≤3300||2-6||≤0.2||UP VE|
|EMC300||300||1040/1270/2080 ≤3300||2-6||≤0.2||UP VE|
|EMC380||380||1040/1270/2080 ≤3300||2-6||≤0.2||UP VE|
|EMC450||450||1040/1270/2080 ≤3300||2-6||≤0.2||UP VE|
|EMC600||600||1040/1270/2080 ≤3300||2-6||≤0.2||UP VE|
|EMC900||900||1040/1270/2080 ≤3300||2-6||≤0.2||UP VE|
Chopped Strand Mat Characteristics
Short strands of fibers held together by a Styrenebinder
Builds up thickness quickly
Very economical and offers good stiffness.
Conforms to tight curves and corners
Can be torn of cut to size
Low cost and easy to use